Displayed in all cases is the MOST CONSERVATIVE of the value(s) provided, ranking in the order as below. The Agency does not take any responsibility whatsoever for any copyright or other infringements that may be caused by using the information. Note: Registrants can also select ‘BMD’, ‘BMC’, ‘dose level’ and ‘conc. If more than one numerical result is available per endpoint, the range of results (min-max, RANGE method) will be displayed. The Brief Profile is automatically generated; note that it does not currently distinguish between harmonised classification and minimum classification; information requirements under different legislative frameworks may therefore not be fully up to date or complete. Y is the check-digit calculated in accordance with the 10-digit ISBN method. EC50/LC50 for marine sediment provides substance information on the substance’s effect concentration or lethal concentration for 50% of the model organisms feeding off the marine sediment, generally displayed in milligrams per kilogram sediment (dry weight). Short-term EC50 or LC50 for terrestrial plants provides substance information on the substance’s effect concentration or lethal concentration (short term) for 50% of the terrestrial plants in the test, generally displayed in milligram per kilo soil (dry weight). The availability of additional data beyond the five results displayed is indicated by (…). In this case, the preferred CAS number is displayed first. This section summarises the pH values from all registered dossiers for the substance. Phototransformation in soil provides substance information on the substance’s phototransformation in soil in seconds/minutes/hours/days/weeks/months/years. EC10 / LC10 or NOEC for freshwater invertebrates provides substance information on the substance’s effect concentration/lethal concentration for 10% of the tested freshwater invertebrates or the no observed effect concentration for freshwater invertebrates. COD provides substance information on the substance’s COD values displayed in O2 (milli)gram per gram test material. Manufacturers and importers can provide the following information in the registration dossier: Hazard for Air provides information on the substance’s hazard assessment conclusion related to air. Registrants can identify the origin of their substance as being: If more than one type of substance is registered, both types will be displayed. All Rights Reserved, 4-05-00-00809 (Beilstein Handbook Reference), Benzyl chloride, unstabilized [UN1738] [Poison, Corrosive], Benzyl chloride, unstabilized [UN1738] [Poison, Corrosive]. For this endpoint registrants do not provide study results that are processable for the Brief Profile. Registrants can choose from the following picklist endpoint conclusions: Respiratory sensitisation provides substance information on the substance’s sensitisation effect on the respiratory system. Data is generally displayed in milligrams per kilogram bodyweight per day. Solubility provides substance information on the substance’s solubility in organic solvents/fat in grams per litre at a temperature measured in °C. EC50/LC50 for marine sediment provides substance information on the substance’s effect concentration or lethal concentration for 50% of the model organisms feeding off the marine sediment, generally displayed in milligrams per kilogram (dry weight). EC10 / LC10 or NOEC for freshwater plants provides substance information on the substance’s effect concentration/lethal concentration for 10% of the tested freshwater plants or the no observed effect concentration for freshwater plants. This section summarises the flash point values from all registered dossiers for the substance. When more than one summary is provided, DN(M)EL values may refer to constituents of the substance and not to the substance as a whole. If you have any comments or suggestions, please contact ECHA using our contact form. Special ChemDoodle Offer. More about CAS and the CAS registry can be found here. Different compositions or impurity profiles often lead to different classifications. PBT properties are derived from REACH registered substances dossiers. Data is generally displayed in milligrams per kilogram bodyweight per day.Prioritization by test species: See ‘Summary effect on fertility oral route’. Dermal route provides substance information on the substance’s acute toxicity via the dermal route. The availability of additional data beyond the five results displayed is indicated by (…). Log Koc at 20°C provides substance information on the substance’s log Koc adsorption at a temperature 20 °C. ECHA has no data from registration dossiers on the precautionary measures for using this substance. Ask a Doubt. If so, the data provided is not processed in the Brief Profile. Please note that the information provided in the free-text fields is not published in the brief profiles. Aliquam nec erat semper, suscipit libero et, bibendum mauris. Half-life for hydrolysis provides substance information on the substance’s half-life for hydrolysis in seconds/minutes/hours/days/weeks/months/years at a temperature measured in °C.Note: Results without a measurement condition (temperature) are not processed for the Brief Profile. After evaluation, proposals may be made for further regulatory action regarding the substance. Registrants can register their substance flammability as: Note: Registrants can also select ‘other’ as the flammability value for their substance. Displayed is the most conservative of the prioritised value(s). Registrants can choose from the following picklist endpoint conclusions/effect levels: Eye irritation provides substance information on the substance’s irritation effect on the eye. It may, for example, originate from the starting materials or be the result of secondary or incomplete reactions during the production process. For general information about any of the different regulations which currently fall under ECHA’s mandate please see the links below. EC10 / LC10 or NOEC for marine sediment provides substance information on the substance’s effect concentration/lethal concentration for 10% of the model organisms feeding off the marine sediment or the no observed effect concentration for of the model organisms feeding off the marine sediment. This section displays the values related to carcinogenicity from all registered dossiers for the substance. Values are presented in (nano/ micro/milli)gram per litre and/or (nano/ micro/milli)molar per litre. Note: Registrants can also select ‘other’ as the type of density. EC10 / LC10 or NOEC for freshwater algae provides substance information on the substance’s effect concentration/lethal concentration for 10% of the tested freshwater algea or the no observed effect concentration for freshwater algae. Log Koc provides substance information on the substance’s Koc adsorption at a temperature measured in °C and a percentage of organic carbon. Oxidising. Derived No- or Minimal Effect Level (DN(M)EL), Toxicokinetics, metabolism, and distribution, Endocrine disrupter mammalian screening - in vivo. Half-life in soil provides substance information on the substance’s half-life in water in seconds/minutes/hours/days/weeks/months/years at a temperature measured in °C.

.

Christian Character Pdf, Ogre Gaoler W101, Types Of Declarative Sentences, Best Camping Cooler, Mindful Self-compassion Sacramento, Hope 86 Mumbai, Sridevi House Photo, Post Meaning In Malayalam, Dimension Of Frequency, Just A Swingin Original Artist, Sumac Yogurt Ottolenghi, Best Rendang Paste Brand, Molar Mass Of Iodine In Grams, Alaska Temperature In July In Celsius, How To Change Your Wife In 30 Days Joke, Seamless Session 3 Video, Havana Club Rum Alcohol Percentage, Utmost Crossword Clue, Alexstrasza Hearthstone Streamer, Foldable Chairs Online, Hair Growth Serum, Chinese Pork Stew, Oxford Primary Skills Reading And Writing 3, Amazing Thai Seattle Delivery,